Bagbages can successfully be hot-ironed on to a wide variety of fabrics - however in order to ensure your fabric is not damaged by the heat, first test the effects on a aprt which will not matter if burnt. Avoid rainwear, stretch fabrics and nylon.
1)
Pull the badge off the display card, peel off and dispose of the glue blob(s).
2)
Set the temperature of the iron to its hottest setting.
3)
Cover the government with a piece of light fabric, e.g. a clean, dry tea towel, to protect the garment from excessive heat
4)
Pre-iron the garment/protective cloth for around 5 seconds to remove any moisture
5)
Position the badge on the garment
6)
Cover the badge and the garment with the protective cloth
7)
Iron the badge on the garment for around 30 seconds applying downwards pressure
8)
Turn the garment inside out, cover with protective cloth, and iron again for around 15 seconds.
Detailed Care & Use instructions are printed on the back of each header card.
